All the necessary equipment for a dental technician’s office

The dental technician is a medical professional responsible for the design, manufacture and repair of dental prostheses. He designs and repairs these medical devices according to orders from dental surgeons and orthodontists. This is a profession that can be practiced in different ways. Indeed, the dental technician can work in the hospital sector, in the offices of dental surgeons, in the offices of stomatologists, mutual insurance companies, etc. It is also possible to open your own practice as an independent dental technician. For the opening of a laboratory, it is necessary to have all the regulatory equipment governed by the standards listed in article L.1336561 of the Labor Code.

What supplies should be used in a dental technician laboratory? The answer in this article.

the workbench

Also called a workstation, the workbench is the furniture on which the prosthetist will work to work on the different materials used in the manufacture of dental prostheses. It should therefore allow great freedom of movementand be equipped with practical equipment such as the blow gun, the handpiece, the suction system, the armrests, the light bulb, and the drawers for storage.

Note that very sophisticated workbenches can be lit using LED lamps for optimal lighting, while some vendors even offer to customize your workstation. In this way, it will be perfectly adapted to your needs.

The heating furnace

The heating furnace is the device with which the coatings will be heated or preheated. This oven can havepractical options such as the smoke extractor for example, or the automatic programming for the different types of coating. Note that some heating ovens also allow you to customize the temperature level, rate of rise in °C, and temperature hold time.

See also  Chromium: a natural and effective slimming ally

The heating oven can also be declined in different sizes: S, L and M.

The strawberries

The bur is a device used in dentistry to perform precision operations on dental prostheses. It is used in particular to polish and prepare temporary prostheses and films.

The bur for the dental technician’s laboratory can be declined in many forms. There thus exists diamond, ceramic, and tungsten carbide burs.

The cutters can also be equipped with different teeth depending on whether they will be used for resin, non-precious alloys, chrome-cobalt, nickel-chromium, dry or wet plaster, soft resins, temporary resins, titanium, etc

So, to buy dental prosthetist supplies such as strawberries, it is possible to go through merchants who specialize in the sale of this type of supplies onlylike the site https://dental-drill.com.

prosthetist tools

Note that to store the cutters, it is also necessary to equip yourself with a cutter holder. Depending on the type of material chosen, it can accommodate between 6 and 12 strawberries, and can be equipped with a cover to protect them.

The sling

The sling is the material with which the dental technician will come to cast under pressure the metals used for the manufacture of the alloys and inject the molten metal into the mould. To work, it uses centrifugal force so that the metal is cast with precision. The slingshots now work electronically to ensure the most accurate result possible. Some of them are even equipped with innovative technologies such as the auto-brake motor which immediately stops the movement as soon as the sling is opened.

See also  The different urology examinations

Very sophisticated slings allow, among other things, the adjustment of the centrifugation time and the speed according to the type of metal to be worked.

The plaster trimmer

The plaster cutter is used, as its name suggests, for cutting plaster models. It exists in water or dry version, just as it is possible to find some for all types of plaster.

When running on water, the trimmer should have an option to adjust the water flow. Some models also have an automatic valve that turns on the water as soon as the engine starts.

Finally, the plaster trimmer should have a disk to trim the elements.

The vacuum mixer

The vacuum mixer is the device with which all the modeling materials for the dental prosthesis will be mixed: coating, duplicating silicones, plasters, etc. The mixer makes it possible to mix without forming bubbles for a perfectly homogeneous result.

This device shall have a mixing paddle and one or more bowls to contain the materials. The most efficient mixers have the option of adjusting the mixing speed and the cycle time. Some can also be equipped with a stand attachment for optimal comfort of use.

The suction system

The suction system is compulsory in order to ensure the quality of the ambient air in the laboratory of the dental technician. Indeed, the work of the various impressions and amalgams releases dust and vapors which can be harmful when they are inhaled by man. It is therefore essential that the laboratory has a system to centralize them and evacuate them afterwards.

See also  Health benefits of having a cat

Moreover, you should know that the suction system is always connected to an air exhaust. It must also be equipped with filters and a system for extracting the waste afterwards, such as an extractable compartment for example.

Laboratory suction models can also have an hour counter for filter replacement.

prosthetist suction system

The microcomputer

Since the democratization of computer-aided design, any dental prosthesis laboratory that offers this process must be equipped accordingly and in particular with a microcomputer. This will be used, among other things, to the modeling of the prostheses and to contain the software intended for the digitization of the processes.

In the context of computer-aided manufacturing, the laboratory can also acquire specific machine tools and 3D printers.

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Retour en haut
Retour haut de page